About
Instructions: 1. Clean your wall or surface: Be sure that the surface you are applying the Vinyl Wall Decal to is: smooth, dry and free of dust and dirt. Vinyl Wall Decals can be applied to walls, wood, glass, concrete, metal or any smooth, dry surface. Vinyl Wall Art Decals are removable but may not be repositioned or reused. Do not apply to freshly painted walls! Wait a minimum of 2 weeks after painting. 2. Preparing your Vinyl Wall Art Decal: Lay each Vinyl Wall Art Decal on a flat surface, graphic side up. If you notice any air bubbles between the decal and clear transfer tape remove them by rubbing on just the vinyl graphic portion of the decal with your fingers to reapply the vinyl to the transfer tape. Once you have removed all the bubbles your decal may not lay flat, to make your decal lay flat carefully lift the transfer tape and vinyl decal away from the paper backing, make sure that the vinyl decal is sticking to the transfer tape. If the decal is not sticking lower the transfer tape back over the part of vinyl that is not sticking and rub the vinyl again with you finger. DO NOT completely remove the transfer tape from the paper, only do one half of the decal at a time. Once you have removed all the air bubbles and your vinyl is laying as flat as you can get it, then press firmly over the entire decal with the edge of a credit card or similar object. You are re-activating the bond between the decal and transfer tape. If any air bubbles were not removed you can put a crease the vinyl decal where the air bubble is. 3. Planning your layout: Arrange your Vinyl Wall Art Decal on your surface using masking tape (on the top edge only), DO NOT remove the white backing paper until you are happy with your layout. 4. Apply the Vinyl Wall Art **DO NOT USE WATER** Flip the decal up and starting from any corner, slowly peel the white or blue backing paper away from the transfer tape, the vinyl decal should be sticking to the tape. If some of the decal re